Middle Atlantic Products FlexView FVS IFP Serie Manuel D'instructions page 8

OPERATION
DURING OPERATION:
• IF THE FLEXVIEW MAKES UNUSUAL NOISE OR SMELLS, SWITCH OFF THE MAINS VOLTAGE IMMEDIATELY.
• TAKE CARE THAT THE CABLES ARE NOT DAMAGED.
• BEFORE CART IS MOVED, UNPLUG THE MAINS CABLE ON THE MOBILE EQUIPMENT.
Move Move
Up Down
NOTE: If FlexView does not move up, reset the
actuator by pressing Move Down until completely
lowered, then press and hold Move Down for three
seconds as the label indicates.
Page 8