Table des Matières
Publicité
DISPLAY INSTALLATION (CONTINUED)
Hanging the Display
1. Tilt display and hook display mounting brackets onto flange of horizontal display bracket into grooves
along the top of the bracket. (FIGURE E)
2. Center display on horizontal display bracket, then push along the bottom of display until both display
mount brackets click into place. (FIGURE F)
3. To remove display from the display cart, pull both release cord rings down while pulling bottom of
display away from the horizontal display bracket. Lift display off flange of horizontal display bracket.
(FIGURE G)
FIGURE E
NOTE: Views shown without display cart for clarity.
FIGURE F
Page 12
Release Cord
FIGURE G
Publicité
Table des Matières
