Middle Atlantic Products FlexView FVS IFP Serie Manuel D'instructions page 10

FLAT PANEL INSTALLATION
NOTE: If installing optional Camera Mount or Soundbar Mount, they must be installed prior to installing
display. Refer to instructions I-00875 for Camera Mount and I-00876 for Soundbar Mount.
Selecting The Mounting Hardware To Attach Brackets To Flat Panel
1. Identify the correct diameter screw for the flat
panel threaded inserts. The correct screws
should thread easily and not pull out when
tension is applied.
2. To determine proper screw length, insert thread
depth indicator into a threaded insert on the flat panel.
3. Mark the thread depth indicator 1/8" above the
depth of the threaded insert. (FIGURE A)
4. Select a screw that is shorter than the 1/8" mark
made on the thread depth indicator.
NOTE: Do not use any screw longer than the 1/8"
mark or damage to the flat panel may occur.
Small Straw
or toothpick
Depth Plus 1/8" Small Straw
or toothpick
Allowance Mark
Dimples (Face Up)
Universal
Washer
Mark 1/8" Above Depth
Thread Depth Indicator
Depth Plus 1/8"
Mark Allowance
M8
M6
M5
M4
FIGURE B
Page 10
FIGURE A