Unit Maintenance - Middle Atlantic Products FlexView FVS IFP Serie Manuel D'instructions

CABLE MANAGEMENT / EQUIPMENT MOUNTING
1. Raise display to highest position before securing cables. Create a service loop to assure adequate
cable length when display is fully extended. Cables can be secured to movable clips (provided) using
wire ties. Secure Cable Management Clips into existing clip mounting holes in desired locations
using supplied wood screws. (FIGURE N)
2. Lower display down to the lowest position to ensure you have adequate cable length. (FIGURE N)
Middle Atlantic PD-815SC
(8) outlet, 15 amp power strip
with surge and circuit breaker

UNIT MAINTENANCE

1. Clean only using soft dry cloth.
2. Over time, lift mechanism may begin to squeak. To lubricate, apply lithium or Teflon® grease
to the lift arms on both sides of unit.
Cable Service
Loop Routing
To Flat Panel
FIGURE N
Page 15
Cable Management Clip
Cable Management Clip
Mounting Holes
Accessory /
Storage Trough
Wood Screw