Yamaha YRS-1000 Mode D'emploi page 78

Remote control features
■ Setting macros for the TV without the
tuning capability
1
Press and hold CODE SET and press one of
the input selector buttons to select the input
source you want to set macros for.
Proceed to step 2 while holding down CODE SET.
TV MUTE
While holding
down, press
CODE SET
2
Press MACRO while holding down CODE
SET.
TV MUTE
While holding
down, press
CODE SET
3
Press INPUT1.
Check that the TV screen changes to the input 1
screen.
INPUT1
4
Press TV INPUT repeatedly until the screen
changes to the display of the input source
selected in step 1.
TV INPUT
5
Press ENTER to confirm the setting.
76
En
STB VCR DVD AUX
MACRO
ENTER
■ Operating macros
Press and hold one of the input selector buttons
for approximately two seconds to select the input
source you want to operate macros for.
The TV input changes at the same time the input mode
changes.
STB VCR
■ Canceling the macros
1
Press and hold CODE SET and press one of
the input selector buttons to select the input
source you want to cancel the macros for.
Proceed to step 2 while holding down CODE SET.
TV MUTE
While holding
down, press
CODE SET
2
Press MACRO while holding down CODE
SET.
TV MUTE
While holding
down, press
CODE SET
3
Press ENTER to cancel the macros.
AUX
DVD
STB VCR DVD AUX
MACRO
ENTER