Abus PR2800 Notice De Montage Et D'utilisation page 42

Masquer les pouces Voir aussi pour PR2800:

Table des Matières

Les langues disponibles

Underlay for the lock body

The lock body underlay allows for a more favourable assembly position of the wall cover plates to be

achieved, as these can be mounted in a more stable area of the doorframe / wall as a result

(Fig. 41-43).

Note: to determine the cylinder length required (table 1, page 71), the underlay thickness of

18 mm must be added to the existing thickness of the door leaf.

Fig. 41

Fig. 42

NRS PR-Alarm:

Equipment kit for an alarm function of the reinforced door bar (Fig. 44).

Simple retrofit by replacing the lock casing caps.

Sounds at 110 decibels → see separate instructions enclosed with the product.

Fig. 44

IX. Disposal

At the end of its service life, dispose of the product in accordance with the applicable legal require-

ments. Dispose of the packaging according to type. Separate the cardboard, foil and plastic elements

for recycling. Please contact the local authority responsible for disposal if you have any queries.

Warranty

ABUS products are designed, manufactured and tested in accordance with applicable regulations

with great care. The warranty exclusively covers faults that are caused by material or manufacturing

defects. If a material or manufacturing defect can be proven, the product will be repaired or replaced

at the discretion of the warrantor. In such cases, the warranty ends with the termination of the origi-

nal warranty period. Any further claims are expressly excluded.

ABUS assumes no liability for defects or damage that has been caused by external influences (e.g.

transport, external forces), improper use, normal wear and tear or non-compliance with this oper-

ating and installation instructions document. If a warranty claim is asserted, the product must be

returned with the original receipt with date of purchase and a brief written description of the fault.

Subject to technical alterations. No liability for mistakes and printing errors.

ABUS August Bremicker Söhne KG | D 58292 Wetter | Germany

Tel.: +49 (0) 23 35 63 40 |

Fig. 43

Table des Matières