Technical Characteristics; Extras - Orbis VIARIS UNI Manuel De L'utilisateur

TECHNICAL CHARACTERISTICS

Feeding
Nominal frequency
Power
Off load
Load function
Charging modes (depending on model) Modes 1 and 2 according to EN 61851-1
Connector cable Type 2.
Communication Wi-Fi802.11
Closing of the enclosure
Protection class
Degree of protection
Degree of mechanical protection
RCD-DD protection.
Activation / Stop modes
Type of terminals
Peeling length
Operating temperature

EXTRAS

VIARIS UNI chargers can incorporate, depending on the model:
 Base Schuko
Charging modes 1 and 2 (N/A in UK)
 Single Phase / 3 Phase energy meter
Certified according to the MID Directive (2004/22/EC) According to EN 50470-3
 Ethernet communication
For installations requiring Ethernet communication.
The configuration is done by accessing the web platform of the charger.
You must choose between DHCP (dynamic IP assignment) or IPStatic, where
you will have to fill in the ethernet network data (IP, MAC, Gateway, Subnet
Mask, DNS Server) provided by the person responsible for it.
 Communication 4G
Wireless communication can be installed using a Wi-Fi USB Dongle.
It is a requirement that you configure in the USB dongle an access point with
SSID: ORB_VIARIS_4G and PASSWORD: ORB1234$, in addition to setting
up the APN depending on the operator providing you with the SIM card.
|
| Depending on characteristics label
|
Single phase
4 W
7 W
(Schuko)
Mode 3 according to EN 61851-1
Load mode 3: according to EN 62196-2
b/g/n
with screws
Case II. Insulating envelope
IP54 according to EN 60529
IK10 according to EN 62262
6 mA
Touch or RFID configurable by App.
without screws
12 mm
-30 °C to + 50 °C
67
Three-phase
4 W
14W