Power Connections - Orbis VIARIS UNI Manuel De L'utilisateur

POWER CONNECTIONS

Before accessing the terminal connectors isolate the electrical
supply.
The unit should only be opened by authorized and qualified /
competent electricians.
Please refer to illustrations below for the connection terminals sequence:
Single phase
The terminals marked as Optional are to connect the supply of the additional
Schuko output. This connection should be protected with independent
protections.
If your VIARIS UNI does not have as option the additional Schuko output these
terminals are not functional, avoid making a connection in them.
If your charger has the extra MID meter, the electrical supply connections will
be made on the meter itself, respecting the order of the phases indicated on the
device
Three-phase
54