Installing The Wall Mount; Assembling The Wall Mount - Samsung VS20T75 Serie Guide D'utilisation

Installing the wall mount

CAUTION
• The wall mount's mounting screws must be affixed to a hard wall or underlying wall stud.
– If you install the wall mount into drywall, you must screw the supporting screws into an
underlying stud.

Assembling the wall mount

1
• To disassemble the wall mount, follow steps in reverse order.
Installing the wall mount
03
04
Screws
Screw Anchors
❇ Please refer to the QR code for detailed information on the installation of the wall
mount.
Wall mount hole
01
02
113 cm
(44 1/2 in)
05
2
01 The wall mount installation should be set
so the top of the wall mount is 113 cm
(44 1/2 in)from the floor.
02 Using the wall mount as a template, mark
where the screw holes will be placed.
03 Drill the holes to a depth of 50 mm (2 in)
using a 6 mm (1/4 in) drill bit, and put the
provided screw anchors into the hole.
04 Fix the wall mount to the wall with the
provided screws.
05 Plug in the wall mount, place the vacuum
into the wall mount, and then confirm that
the battery level indicator is displayed.
English 15