Owner's manual
IH-xxxx-D series infrared heater
Note: at the side of the controller element, there's a button "Manual key"
that can be used to switch on the heater without the remote control.
Normally, it's not necessary to use this button.
Manual key
3.2. Using the remote
The controller element is placed at the side of the heater:
The LED's on the controller element indicate the operation (LED's 1 to 4
indicate 25%, 50%, 75% respectively 100% power; LED 5 is the infrared
receiving LED; LED 1 may blink alternating red and green if a timer has
been set).
Page 17 / 198
Version 1.3