Masterbuilt EF13G1D Mode D'emploi Et Consignes De Sécurité page 14

Troubleshooting
SYMPTOM
Power light won't come on
Fryer takes excessive amount of time
to heat up or does not heat at all
Controller does not adjust temperature Not plugged into outlet
Fryer reaches extremely high
temperatures
Power light is on, fryer isn't heating
Fryer is beeping continuously, power
button and cook function button
flashing.
If your air fryer is beeping (10 beeps per minute), and the lights are flashing, you have a TC error.
Contact Masterbuilt at www.masterbuilt.com/pages/support.
If symptom is not listed here, please contact Masterbuilt at www.masterbuilt.com/pages/support.
14
CAUSE
Not plugged into outlet
House breaker tripped
Controller malfunctioning
Fryer plugged into the wrong type of
extension cord
Lid must be closed for operation
Controller malfunctioning
Controller malfunctioning
Temperature setting too high
Controller/element malfunctioning
Faulty element
Controller malfunctioning
Fryer is in cool down mode
POSSIBLE SOLUTION
Check outlet connection
Make sure other appliances are not
operating on the same electrical
circuit. Check household breakers.
Contact Masterbuilt at
www.masterbuilt.com/pages/support
Use the properly rated extension
cord or set fryer so extension cord
does not have to be used.
Close lid to retain heat in fryer
Contact Masterbuilt at
www.masterbuilt.com/pages/support
Check outlet connection
Contact Masterbuilt at
www.masterbuilt.com/pages/support
Adjust controller to lower setting
Contact Masterbuilt at
www.masterbuilt.com/pages/support
Contact Masterbuilt at
www.masterbuilt.com/pages/support
Contact Masterbuilt at
www.masterbuilt.com/pages/support
Press any button to cancel alarm.
Inspect fryer and eliminate cause
for overheating.
Check for grease fires by slowly
opening the lid. If there is no
fire, close the lid and press any
button to cancel alarm. The fryer
will resume the normal cooking
cycle when it reaches the set
temperature.
If fire occurs, close lid and, press
any button to cancel alarm. Unplug
the fryer.