ENGLISH
SYSTEM SETUP
VIDEO SETUP
Select Video in the setup menu, and display the Video submenu:
Aspect Ratio
4:3PS/4:3LB: Choosing this setting if your DVD player is connected to a normal ratio
TV. You can fill the movie to the entire screen of your TV. This might mean that
parts of the picture(the left and right edges)won t be seen.
16:9 : Choose this setting if your DVD player is connected to a wide screen TV. If
you choose this setting and you don't have a side screen TV, the images on the
screen may appear distorted due to vertical compression.
Notes: The image display ratio is related to the recorded disc format. Some disc can
not display images in the aspect ratio you choose. If you play a disc recorded in 4:3
format on a wide screen TV, black bars will appear on the left and right side of the
screen. You must adjust the screen setting depending on the type of the television
you have.
View Mode
Select View Mode to toggle between views.
FILL: display images with the black bands above and below but respects the original
format of the program and does not cause loss of part of the image.
ORIGINAL: Allows you to keep the original settings of the movie.
AUTO FIT: Allows you to expand the image to full screen.
PAN SCAN: Allows you to enlarge the image so as to eliminate the black bands
above and below but the size of the left and right.
TV System
This product supports output of various system, including NTSC, PAL, Auto.
If your TV set has only NTSC or PAL system, the screen will blink and become
colorless when a wrong system is selected.
Note: For more information of output format, refer to the instructions or your TV
set.
13