Connections - Trevi DVMI 3541 SD Manuel De L'utilisateur

Connections

Digital Amplifier
Coaxial cable
• CONNECT DVD PLAYER TO TV SET BY AV SOCKET
Use the Video Composit cable (not supplied) to connect DVD player and your TV. Set the
[Video>Video Out] to [CVBS].
• CONNECT DVD PLAYER TO TV SET BY S-VIDEO SOCKET
Use the S-VIDEO cable (not supplied) to connect DVD player and your TV. Set the
[Video>Video Out] to [S-VIDEO].
• CONNECT DVD PLAYER TO TV SET WITH SCART SOCKET
Use the SCART cable (not supplied) to connect DVD player and your TV. Set the
[Video>Video Out] to [RGB].
• CONNECT THE DVD TO A TV USING THE Y/Pb/Pr JACKS
Use the COMPONENT Cable (not supplied) to connect DVD player to your TV. Set the
[Video>Video Out] to [YUV]. For Progressive Scan, set to [P-Scan]. [YUV] and [P-Scan]
signal is transfered through same jack. If the TV set supports P-Scan function, you can set
[Video>Video Out] to [P-Scan]. If not, you can set [Video>Video Out] to [YUV].
• CONNECT DVD PLAYER TO TV SET WITH HDMI SOCKET
Use the HDMI cable (not supplied) to connect DVD player and your TV. Set the
[Video>Video Out] to [HD].
Note: see paragraphs VIDEO SETUP>Video Out and VIDEO SETUP>HD Resolution to
active and set the HDMI output.
• Connecting to an AV Amplifier with Digital Audio Input
Use the COAXIAL cable (not supplied) to connect DVD player and your DIGITAL
AMPLIFIER. Set the [Audio>Digital Output] to [PCM]. Set the DIGITAL AMPLIFIER to the
AV input connected to the DVD player.
HDMI IN
AUDIO IN
VIDEO IN
YPbPr IN
S-VIDEO IN
9
ENGLISH
Connections