Chal-tec 800TT Mode D'emploi page 22

Attaching basket & rear light
• If necessary, slide the saddle bar into the
saddle post (the narrow end must point up-
wards) and adjust it to the height you want.
Tighten up the quick-release lever.
• Place the saddle on the saddle bar and ad-
just it to the optimum angle of inclination.
Tighten the two nuts using an open- jaw
wrench (size 13).
• Take out the holder with rear light, rear re-
flector and plate from the package. Place
the holder to correct position,tighten the
two nuts using an Allen key.
• Plug the black connector of rear light.
22