Backlight - Klein Tools IR5 Mode D'emploi

BACKLIGHT

The backlight may be toggled on/off by short presses of the Control
button . When on, the Backlight icon will be visible on the display.
3
MODE SELECTIONS
When measuring temperature, the meter continuously samples the
object being measured. Following a measurement, press the Mode
control button repeatedly
• the maximum temperature value measured ('MAX').
• the average value measured ('AVG').
• the difference between the maximum and minimum values
measured ('DIFF').
• the minimum value measured ('MIN').
• Press once more to exit the MODE menu.
SETTINGS
User-adjustable settings may be defined using the SET control button
Press SET to enter the settings menu. Subsequent presses of SET
2
will cycle through the following list of options:
• Emissivity: Set the numerical value of the emissivity to match
the surface being measured (see the EMISSIVITY section
below). When in this setting, the Emissivity icon will flash
on the display.
• Units: Switch between °F (Fahrenheit) and °C (Celsius). When
in this setting, the '°F' or '°C' icon will flash on the display,
indicating the temperature scale that is currently active.
• Mute temperature limit alarms: (Turn audible limit alarms on/
off) When in this setting, the Audible icon ' ' will flash on the
display. When on, the High '
When off, they will not be visible.
• High temperature limit setting: Assign a numerical value to the
high-temperature limit. When in this setting, the High icon '
will flash on the display.
• Low temperature limit setting: Assign a numerical value to the
low-temperature limit. When in this setting, the Low icon '
will flash on the display.
When in any setting, control buttons
down to adjust settings, and they may be used to select units, turn
alarms on or off, or adjust the numerical values of the respective
parameters up or down.
OPERATING INSTRUCTIONS
to cycle through:
1
Lo
'/Low ' ' icons will be visible.
Hi
and
1 3
function as up/
.
2
'
Hi
Lo
'
7