Backlight - Klein Tools IR10 Mode D'emploi

DATA HOLD
Data is held on the display for 15 seconds following the end of any
measurement event. HOLD
AUTO POWER-OFF (APO)
At the end of any measurement event, the meter automatically powers off
after 15 seconds of inactivity.

BACKLIGHT

Press and hold the MODE button
STATISTICS
MIN / MAX / AVG /DIFF statistical parameters are specific to the current or
most recent measurement event. Following the end of measurement event,
before auto power-off occurs, subsequent presses of the MODE button
may be used to toggle through the parameters.
SETTINGS
Settings are accessed by pushing the SET button
in HOLD status. Subsequent pushes of the SET button toggle through the
various settings options. The settings menu may be exited at any time by
pulling the trigger
• EMISSIVITY: Emissivity may be set by using the UP/DOWN buttons
This setting is not available if the K-type probe is inserted into the meter
• °F / °C: Press the MODE button
Celcius temperature scales. The meter will remain in the scale selected
following power on/off cycles
• HI: High temperature alarm. Press MODE
temperature alarm. Use the UP/DOWN buttons
threshold above which the user will be alerted
• LO: Low temperature alarm. Press MODE
temperature alarm. Use the UP/DOWN buttons
threshold below which the user will be alerted
• AUDIBLE ALARMS: Press MODE
temperature alarms. Note the on/off indicator on the bottom left of the display.
When audible alarms are off the mute icon
Visual alerts are always on and are indicated by flashing Hi/Lo icons on the
display when the measurement is above/below the temperature thresholds.
• TRIG: Press MODE
on the meter will automatically APO if the trigger is held depressed for more
than 10mins when measuring using IR. This setting is not available if the
K-type probe is inserted into the meter.
OPERATING INSTRUCTIONS
appears on the display.
J
1
or by toggling through all available options.
5
1
to turn on/off the trig function. When trig is turned
1
to activate / deactivate the backlight.
2
to switch between Fahrenheit and
to turn on/off the high
1
3
to turn on/off the low
1
3
to turn on/off audible alerts for Hi/Lo
1
will be visible in the display.
C
when the meter is
to set the temperature
to set the temperature
1
.
3
7