degardo TREVIA I Manuel D'utilisation page 22

Operation using the remote control
22
Button Description
POWER-ON (On)
F1
main switch
POWER-OFF (Off)
F2
main switch
F3 Operating light
F4 Touch wheel
F5 Setting white light
Setting colour
F6
saturation
F7 Brightness
Programme
F8
selection
F9 Speed
POWER-ON (On)
F10
zone control
POWER-OFF (Off)
F11
zone control
www.degardo.de
Function
Switches on all the lights in all zones.
(short press)
(1) Switches off all the lights in all zones.
(short press)
(2) Changes the lights in all zones to "nightlight
mode". (press for longer than 2 seconds.
Mode is cancelled by pressing button F1 or
button F2).
Remote control operating indicator. If the
indicator illuminates red, the batteries must be
replaced.
Sets and selects the colours. Touching the
touch wheel displays the corresponding
colour. If a colour mode is running, the current
programme is ended
Smoothly varies the colour temperature from
warm white (left; 2700 kelvin) to cold white
(right; 6500 kelvin) using the control
Smoothly adjusts the colour saturation (RGB
and white mix)
Increases or reduces the brightness of the
lights. Sets the brightness as well as the static
colour or colour change programme.
Selects a colour change programme
(1-9; see colour change programme): M button
Sets the speed of the colour change
programme: S-/S+ buttons
(1) Switches on the relevant light zone.
(short press)
(2) Pairs the remote control with the lights in a
zone. (see pairing/unpairing)
Switches off the relevant light zone.
TREVIA | STORUS | VARIA | ROVIO