Hiyasu HS-9UIHN Mode D'emploi page 13

Remote control operation
Operating guide. General functions
1- Press ON/OFF to switch on the unit. (Note: When the
unit is switched off, the slats close automatically)
2- Press the MODE key to select the desired mode or, press
COOL or HEAT to go directly into these respective modes.
3- Select the desired temperature using the keys + and –
(in AUTO mode, it is not necessary to select the temperature).
4- Press the FAN key and select the fan speed:
Automatic, low-average-high-very high.
5- Select the direction of the air flow using the SWING Key
Operating guide. Optional functions
1- Press the SLEEP button for night-time operation,
2- Press TIMER ON and TIMER OFF to program the time on the
timer.
3.- Press the LIGHT button, to switch the light in the display
on or off (this function is not available in some models)
4.- Press the TURBO button to increase or reduce the
temperature quickly.
X-FAN function:
With this function, the moisture in the evaporator of the inner unit will still be removed, to prevent any
mould forming.
1.- With this function activated: When the unit is switched off, the fan will continue
operating
for 10 minutes at low speed. If the inner unit fan is to be stopped manually, press the
X-FAN key
2.- With this function activated: When the unit is switched off by pressing the ON/OFF key,
the unit will stop completely.
AUTO RUN function:
This function allows the unit to automatically select the most suitable operating mode according to the
surrounding ambient temperature. With this function, the temperature will not be displayed in the LCD
screen.
TURBO Function:
With this function, the unit will operate at a very fast fan speed, so as to cool or heat quickly and to
adapt the ambient temperature to the preselected temperature as soon as possible.
Introduction for special functions
- 9 -