How Does My Landroid; Finding The Charging Base; Rain Sensors; Sensing The Boundary Wire - Worx LANDROID WG794E Manuel D'instructions

3.2 how does my Landroid

where to go?
®
Your Landroid M is capable of doing things on its own. The
®
Landroid M knows when it needs to go to its Charging Base (4) to
charge, can sense when it is raining, can stop itself if it senses a
problem, and knows to stop, draw back, and then turn around when
it bumps into something blocking its path, such as a person, pet, or
®
other object. The Landroid M will also automatically stop its Blade
Turning Disc (13) from rotating if it is lifted off the ground to prevent
an accident.
A. Finding the charging base
®
When your Landroid M needs to recharge, it will stop mowing and
follow the Boundary Wire (21) in an anti-clockwise motion back to its
®
Charging Base. Landroid M will automatically stop rotating its Blade
Turning Disc when returning to its Charging Base. However , if it is
required to go back the Charge Base manually ( when you press the
home button), the Blade Turning Disc will rotate and cut the grass
near the boundary wire. So if you want to mow the grass near the
boundary wire, just press the home button. We suggest you use this
function when the battery power is more than 75%. You can check
the battery power in the display.
B. Rain sensors
®
The Landroid M is fitted with a Rain Sensor (9) that will detect
rain drops and tell the Landroid
Boundary Wire back to its Charging Base (See Fig. B )
®
The Landroid M is programmable to have a delay start function
(0 – 180 mins) when it rains. When the rain sensors are wet, the
®
Landroid M returns to its docking station. Only when the rain sensors
become dry will the Landroid
and Troubleshooting Guide for more details.
C. Sensing the boundary wire
®
The Landroid M always obeys the border set by the Boundary Wire and uses two sensors at its front to sense when it is
getting close(See Fig. C). Before changing direction, the Landroid
*This is the recommended distance. Use the provided distance gauge to ensure proper installation.
D. Starting and stopping while mowing
If you would like to command the Landroid
To start mowing, open the Control Panel Cover and press the ON/OFF key, then press START key directly or input your
further commands, then press the START key (See Fig. D,E ).
D D
Lawn Mowing Robot
®
M know
®
M to stop mowing and follow the
®
M begin the delay start countdown or return to mowing immediately. See the Programming
®
M to stop mowing, then simply press the STOP button (8) on top of the mower.
B
C
®
M will overrun the Boundary Wire up to 20 cm*.
E
11
EN