Steps Of Assembly - SPORTSTECH F75 Mode D'emploi

Nr
80 Red round cushion pad
81 Black round cushion pad
82 Powder metallurgy bush
83 Middle line of electronic meter
84 Upsidedown T-shaped socket
85 Lower cover of panel of
86
87 Left and right rear angle beads
Step 1: Installation of complete machine
1. Hold the electronic meter and slowly lift it to fixed screw hole.
2. Fix electronic meter onto column with 74# screw and 84# flat gasket.
3. Fix protecting cover of column onto rear cover of electronic meter on the top of
column with 82# screw.
4. Fix column onto pedestal with 74# screw, 76# screw and 84# flat gasket.
5. Remove package stator (red) fixing frame and pedestal, and prevent the frame from
hurting people when bouncing off.
Name
Trim strip

7. STEPS OF ASSEMBLY

53
Nr Name
88 Grip pulse + ascension / switch
89 Grip pulse + speed shortcut key
90 Flat gasket
91 Spring washer
92 Locknut
93 Silicone oil
94 Instruction
95 Dumbbell