Aercus WeatherSleuth Mode D'emploi page 43

FOR FURTHER ASSISTANCE CONTACT THE APPROPRIATE SUPPLIER AS PER THE
CONTACT SECTION AT THE START AND END OF THIS MANUAL
Aercus Instruments™ - WeatherSleuth®
display Received a Read Request from the WeatherSleuth® receiver. A
green progress bar will provide you with the upgrade status.
DO NOT OPERATE THE MOUSE OR KEYBOARD WHEN
UPGRADING to prevent interruption of the upgrade.
8. Once the firmware upgrade is complete, the dialog box will display Read session
is completed successfully, as shown in Figure 30.
9. Wait about one minute for the WeatherSleuth® receiver to reboot. You can
now Exit the upgrade window, and access the module again, as referenced in
Section 3.6.4.
All of the lights should be on except the Server light (you will need to reprogram the
Wunderground.com settings).
43 | P a g e