Aercus WeatherSleuth Mode D'emploi page 33

6. Once the firmware upgrade is complete, the dialog box will display Read session is completed
successfully, as shown in Figure 30.
7. Wait about one minute for the WeatherSleuth® module to reboot. You can now Exit the upgrade
window, and access the module again, as referenced in Section 3.6.4.
You may be required to enter some settings, so check all of the panels for completeness.
Mac Users
1. Download the latest version of firmware at:
2. Important Note: Close all of other applications while running the firmware update. This will
insure the upgrade process will not be interrupted.
Aercus Instruments™ - WeatherSleuth®
Figure 29
Figure 30
www.aercusinstruments.com/downloads/
33 | P a g e