Aercus WeatherSleuth Mode D'emploi page 35

6. Once the firmware upgrade is complete, the dialog box will display Update Success.
7. Wait about one minute for the WeatherSleuth® module to reboot. You can now Exit the upgrade
window, and access the module again, as referenced in Section 3.6.4. Note: you may be required to
enter some settings, so check all of the panels for completeness.
8. If an error occurs during the firmware upgrade or reset process, the IP address of the WeatherSleuth®
will no longer appear on the local network. In this case, press the DHCP button to re-upgrade
(Reference Figure 30e). A random IP address will be allocated to the WeatherSleuth® which will
allow you to repeat the firmware upgrade procedure.
Aercus Instruments™ - WeatherSleuth®
Figure 30c
Figure 30d
35 | P a g e