GYS MSW 82000 Manuel D'utilisation page 7

Translation of the original instructions
SAFETY INSTRUCTIONS
This manual includes guidelines on the operation of your device
and the precautions to follow for your own safety. Ensure it
is read carefully before first use and keep it handy for future
reference. These instructions should be read and understood
before anyone operates the product. Any modifications or
maintenance that are not specified in the manual should
not be undertaken. The manufacturer is not liable for any
injury or damage due to non-compliance with the instruction
manual. In case of problems or uncertainties, please consult
a qualified person that is able to handle the device correctly.
This device should only be used for power supply within the
limits indicated on the device and in the manual. The safety
instructions must be followed. In case of improper or unsafe
use, the manufacturer cannot be held responsible
Device suitable for indoor use only. Do not expose to rain or
excessive moisture.
Do not cover the device
Do not place the device near a fire or subject it to heat or to
longterm temperatures exceeding 50°C
Do not obstruct the cooling vents. Refer to the installation
section before operating the machine.
The automatic mode of operation and usage restrictions are
explained below in these operating instructions.
Risk of explosion and fire!
A battery being charged can emit explosive gas.
• During the charge, the battery must be placed in a well
ventilated area.
• Avoid flames and sparks. Do not smoke.
• Protect the electrical contacts of the battery against short-
circuiting.
Acid projection hazard!
• Wear safety goggles and protective gloves
• If your eyes or skin come into contact with battery acid,
rinse the affected part of the body with plenty of water and
seek immediate medical assistance.
Connection:
• This device must be connected to an earthed power supply
MSW 82000
EN
7