Instruction To Use - CONTINENTAL EDISON CEMB5B3 Guide D'utilisation

INSTRUCTION TO USE

IMPORTANT !
The beer dispenser allows you to keep a 5L beer keg at a temperature
(between 3 ° C and 6 ° C). It is compatible only with 5-liter stand-alone
drums equipped with a manual beer draft handle. Without the manual pull
handle sold with the drum, the beer dispenser could not be used.
A. 2 Electrical connections :
1) Power outlet (220-240V~)
Plug the power cable (9) into the socket (10) and then put the voltage
source selector (13) on position 220-240V. Then plug the plug into a wall
socket. Press the AC ON/OFF button to turn on the device.
2) Cigarette lighter (12 V
Plug the power cable (8) into the socket (11) and then put the voltage
source selector (13) on the 12V
cigarette lighter socket. If you want to turn off the device, put the voltage
source selector (13) on DC OFF.
Remark :
Since the beer blower fan is located on the back of the appliance, you
must leave a minimum distance of 10 cm at the rear of the appliance to
allow air to circulate freely.
B.
Brewing the beer cask before use
To obtain perfect quality beer at ideal temperature, the drum must be kept
cool for several hours. For this, you must put the beer keg to the
refrigerator compartment for the time indicated on the drum (Follow the
recommendations on the drum).
If you do not have a refrigerator, you can consider cooling the keg directly
in the beer dispenser for a minimum of 48 hours. In this case, please note
that the beer drawn will not be optimized, for example no foam or reduced
)
⎓
position. Then plug the plug into a