Troubleshooting Guide - CONTINENTAL EDISON CEMB5B3 Guide D'utilisation

TROUBLESHOOTING GUIDE

Some malfunctions can be easily solved. Before calling for service or a
repairer, please refer to the following table:
Possible
faults
The beer 1. The extension tube is
does not not inserted correctly.
come out.
2. There is no barrel of
beer in the dispenser, or no
beer in the barrel.
The beer 1. The beer was not
drawn is too properly poured into the
frothy, and glass.
there is not
2. The temperature in the
enough
drum is too high (the best
beer.
temperature is between
3°C and 5°C).
3. The beer barrel was
shaken before use.
4. The cask is almost
empty.
The flow of 1. The pressure in the
beer is too drum is too low.
low.
2. Extension tube or
manual pull handle is
leaking.
For any other problem occurring on your device: contact the After-Sales
Service.
Causes Solution
1. Insert the extension tube
correctly.
2. Place a new keg of beer in
the dispenser.
1. Open the faucet completely
and quickly. Find the best
distance between the faucet
and the glass (between ¾ and
the full height of the glass).
Check the color and
concentration of the foam: it
should be dense and
cream-colored.
2. Cool the beer to 3°C -5°C.
3. Rest the drum until the foam
disappears.
4. Place a new keg of beer in
the dispenser.
1. Check the condition of the
tube.
2. Check the condition of the
manual pull handle.