Thermador TCMTK30RS Consignes D'installation page 7

12. Secure the Left Support Bracket to the Left Cabinet
Mounting Bracket and the Base Plate with two (2) T-
20 Torx head screws.
13. Center coffee maker on base plate and ensure that
the notch on bottom right is engaged in the base
plate.
14. Open the coffee maker door. Secure the Left Support
Bracket from the inside of the coffee maker using four
(4) T-20 Torx head screws.
Installation Instructions
15. Secure the Right Support Bracket from the inside of
the coffee maker using one (1) T-20 black screw.
16. Press the Built-in Coffee Maker Trim Kit into the left
and right Side Cabinet Brackets.
English | 6 |