Support - Thermador TCMTK30RS Consignes D'installation

5. Remove the film from the tape on the Right Support
Bracket.
6. Apply the Right Support Bracket to side of coffee
maker and ensure that the holes on top are aligned.
7. Install the Left Cabinet Mounting Bracket at the top
left of the cabinet opening using two (2) Phillips head
wood screws. Ensure the bracket is flush to the
cabinet side.
1
2
8. Measure 1⅝'' (41 mm) from cabinet base and make
mark on both sides of cabinet.
1⅝" (41) 1⅝" (41) 1⅝" (41)
Installation Instructions
dia. 1/16"
9. Install the Left and Right Side Cabinet Brackets flush
to the cabinet face with two (2) Phillips head wood
screws per side. Install side trim mounting bracket so
that the bottom edge of the bracket is aligned with
mark.
10. Slide coffee maker in cabinet on top of the Base Plate
and move coffee maker to the far right.
11. Plug the transformer wire in to the back left of the
coffee maker, as instructed in the Coffee Maker
Installation Instructions.
1
dia. 1/16"
2
English | 5 |