Harbor Breeze 35061 Mode D'emploi page 9

ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS
7. Once wiring step has been completed, slide the
wired remote receiver in between the bracket and
the top of the downrod ball, with the flat side of the
receiver facing the ceiling. Turn lead wires upward
and carefully push them into the outlet box, with the
white and green wires to one side of the box and the
black wire toward the other side.
8
8. Loosen the two shoulder screws without fully removing the hanger bracket (A). Assemble canopy
(E) by rotating keyhole slot in canopy over shoulder screws in hanger bracket (A). Tighten
shoulder screws. Securely attach and tighten the canopy hole cover (F) over the shoulder screws
in the hanger bracket (A) utilizing the keyhole slot twist-lock feature.
7
9
E
F
Lowes.com/harborbreeze