Harbor Breeze 35061 Mode D'emploi page 11

ASSEMBLY INSTRUCTIONS
11. Installing the light housing: Remove one of the three
screw on the shade housing (I) and loosen the other
two. Connect the 9-pin connector from motor
assembly and light housing (J) together. The two
connectors have keyholes that must be mated
correctly before they can be engaged. Align the
keyhole slots in the light housing (J) with the
assembly screw, turn the light housing (J)
counterclockwise until the assembly screws are
firmly situated in the narrow ends of the keyhole
slots. Replace the third screw and securely tighten
all three screws.
12. Installing the light kit: Insert E11, 50 Watt MAX light bulb (J) into socket. Align the bosses inside
shade housing (I) with the cutouts on the shade (M). Turn clockwise to lock in place and don't
over tighten or force it. NOTE: Do not replace bulb when hot.
12
J
11
I
M
11
I
Lowes.com/harborbreeze
J