Assembly - Bosch Rexroth IMpnio Mode D'emploi

22/84 Bosch Rexroth AG
6

Assembly

When installing the product always observe
the ambient conditions specified in the
technical data (see "Technical data" on
page 27).
Required tools
• TX9 screwdriver
Assembling the IMpnio interface
module
Risk of damage to persons
and property!
Assembly of the IMpnio interface
module requires basic mechanical
and electrical knowledge.
y
Only qualified personnel (see
"Personnel qualifications" on
page 17) are authorized to
assemble the IMpnio interface
module.
y
Measures to prevent
electrostatic discharge (ESD
protection) must be
undertaken to protect the
module and system
components during all
assembly work.
CAUTION
IMpnio | 3 609 929 B64/2008-05
CAUTION
Risk of injuries when
assembling under voltage!
If you do not switch off the power
supply before assembling the
IMpnio interface module, you may
get injured or the device or system
components may be damaged.
y
Always switch off the power
supply to the relevant system
component before assembling
the IMpnio interface module.