Transport And Storage - Bosch Rexroth IMpnio Mode D'emploi

3 609 929 B64/2008-05 | IMpnio
The MS LED indicates the interface module
status.
Table 4 MS
LED display Meaning
Off No voltage or not initialized,
module in "SETUP" or
"NW_INIT" status
Green Module ready for operation,
module not in "NW_INIT"
status
Flashing green Diagnostic events available
(Flashes once:
...)
Flashing green Network configuration with
(Flashes twice: module identification
running
...)
Red Exception error, module in
"EXCEPTION" status
Flashing red Configuration error
(Flashes once:
...)
Flashing red Error in the IP address or
(Flashes twice: IP address not assigned
...)
Flashing red Error in station name or
(Flashes three times: station name not assigned
...)
Flashing red Severe internal error
(Flashes four times:
...)
Bosch Rexroth AG
5

Transport and storage

For storing and transporting the product
always observe the ambient conditions
specified in the technical data (see
"Technical data" on page 27).
21/84