Delivery Conent; Installation Cb Radio; Installation Antenna - Albrecht AE 6491 NRC Mode D'emploi

3. Delivery Conent

1. AE 6491 NRC CB Radio
2. Microphone
3. DC power cord with inline fuse
4. Microphone hanger
5. DIN Mounting kit (1 DIN Sleeve and 2 Removal keys)
6. User manual

4. Installation CB radio

When installing your CB radio in your vehicle, check that during
installation you do not damage any wiring or vehicle components
that may be hidden around the mounting position.

4.1. Installation antenna

To obtain the best performance from your CB radio is important
to install a good quality antenna.
• You should purchase a suitable mobile antenna designed
for the 27MHz frequency band.
• Connect the antenna to the rear antenna socket using a
PL259 coaxial connector. Where necessary, solder the
connector carefully at the inner connector of the coaxial
cable and avoid any short circuit with one of the thin copper
wires of the outer coaxial shielding.
• To obtain maximum performance from the transceiver,
mount the antenna in a suitable position for good and free
radiation from the metallic car surface.
• Standard mobile antennas need a good car body ground
connection for best efficiency. Most standard mobile
antennas cannot work without car body ground connection!
• Special ground less antennas are obtainable for motor
homes or trucks in cases where the antenna position is
32