EN
5.6
Adjusting the Kvs flow coefficient
Tx 10
5.7
Mounting the product
MECHANICAL LOADS AND STRESS
•
Verify that the product is not subjected to mechanical loads and stress when
connecting the product.
•
If necessary, install a corrugated pipe compensator to compensate for
mechanical stress or tension.
Failure to follow these instructions can result in equipment damage.
22
PrimoTherm®
Mounting
A
1. Loosen the screw (A) with
B
2. Slightly pull the
3. Turn the hand wheel to the
4. Retighten the screw.
NOTICE
a screwdriver.
- The screw does not
need to be fully removed.
handwheel (B) away from
the scale.
- The hand wheel
releases itself from the
grid hole.
required adjustment
value Kvs.
- The hand wheel snaps in
at the selected grid posi-
tion.