Information On Safety; Intended Use; Predictable Incorrect Application - afriso PrimoTherm K 180-1 Notice Technique

EN
2.2

Intended use

This product may only be used to circulate the following liquids in intrinsically
safe, sealed, thermal heating systems.
• Heating circuit water as per VDI 2035
• Water/glycol mixtures with a maximum admixture of 50 %
Any use other than the application explicitly permitted in these operating
instructions is not permitted and causes hazards.
Verify that the product is suitable for the application planned by you prior to
using the product. In doing so, take into account at least the following:
• All directives, standards and safety regulations applicable at the installa-
tion site of the product
• All conditions and data specified for the product
• The conditions of the planned application
In addition, perform a risk assessment in view of the planned application,
according to an approved risk assessment method, and implement the
appropriate safety measures, based on the results of the risk assessment.
Take into account the consequences of installing or integrating the product
into a system or a plant.
When using the product, perform all work and all other activities in conjunc-
tion with the product in compliance with the conditions specified in the oper-
ating instructions and on the nameplate, as well as with all directives, stand-
ards and safety regulations applicable at the installation site of the product.
2.3

Predictable incorrect application

The product must never be used in the following cases and for the following
purposes:
• Use with drinking water
• Use with adherent, corrosive or flammable fluids
• Operation with vapour or with corrosive media or media containing oil
• Operation in systems with temperatures exceeding 110 °C (for example,
solar systems)
• Hazardous area (EX)
- If the product is operated in hazardous areas, sparks may cause defla-
grations, fires or explosions
4 PrimoTherm®

Information on safety