5.2
Interchanging flow/return
The flow is at the right side when the product is shipped.
5.2.1
Converting the mixer/bypass (K 180-2 DN 32 only)
Tx 30
Tx 20
Mounting
A
SW 14
1. Loosen the union nut at
the return ball valve (A).
2. Loosen the union nut at
the mixer (B).
3. Turn the return ball valve
by 180°.
4. Turn the pump with the
flow ball valve by 180°.
5. Retighten the two union
nuts.
6. Convert the mixer to flow
left (see Page 15).
B
1. Remove the screws.
PrimoTherm®
EN
15