After-Sales Service; Unpacking; Disposal Of The Packaging; Disposal Of The Unit - Graef WK300 Instructions D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 24
technical modifications
use of unapproved spare parts
Translations shall be carried out to the best of knowledge. We shall not assume any liability for
translation mistakes. The original German text only shall be binding.

AFTER-SALES SERVICE

If your Graef device is damaged, please contact your dealer or the Graef Customer Service at
+49 (2932) 9703677 or write an e-mail to service@graef.de.
IMPORTANT!
If possible, keep the original packaging during the guarantee period of the unit in order to be
able to pack the unit correctly in case of guarantee.

UNPACKING

When unpacking the unit, proceed as follows:
Remove the unit from the box.
Remove the packaging parts.
Remove any stickers on the unit. Do not remove the type plate!

DISPOSAL OF THE PACKAGING

The packaging protects the unit against transport damage. The packaging materials are select-
ed according to the environmental compatibility and disposal-related aspects and can there-
fore be recycled.
The return of packaging into the material cycle saves raw material and reduces the waste vol-
ume. Dispose of the packaging material no longer needed at collection points for the "Green
Dot" recycling system (in Germany).

DISPOSAL OF THE UNIT

At the end of its service life, this product cannot be disposed of in normal domestic waste. The
symbol on the product and in the operating instructions point out to this fact. Reuse the materials
according to their marking. With the reuse, recycling or other forms of recycling of old equip-
ment, you make an important contribution to the protection of our environment. Please ask your
municipal administration for the disposal point.

REQUIREMENTS ON THE INSTALLATION LOCATION

For safe and fault free operation of the unit, the following requirements of the installation location
have to be met:
The unit has to be placed on a solid, flat, horizontal, and non-slipping surface with a sufficient
weight-carrying capacity.
Make sure that the unit cannot topple over.
Choose the location in such a way that children cannot reach the supply line of the unit.
Do not place the appliance on hot surfaces, such as hotplates, or near them.
20

Publicité

Table des Matières
loading

Table des Matières