Dremel 7700 Consignes De Fonctionnement/Sécurité page 23

1600A016V4.qxp_7700 1/15/18 9:32 AM Page 23
High Speed Router Bits
For routing, inlaying, and mortising in wood and other
soft materials. Use with Dremel No. 335 Router
attachment and No. 231 Shaper/Router table.
Brad Point Drill Bits
Titanium coated brad points stay on center and begin
drilling immediately. For use on wood. Size 1/8",
5/32", 3/16", ¼" . 1/8" shank.
HSS Drill Bits
HSS drill bit for use in metal and plastic. Size 1/8",
7/64", 3/32", 5/64", 1/16", 3/64", 1/32". Shank size
matches the drill bit size. Different collet size (481,
482, 483) or Dremel chuck (4486) required according
to drill bit being used.
Glass Drill Bits
Diamond tipped drill bits for use on glass and ceramic
wall tile. Lubricant included.
Collet Fan
Blows dust away for greater visibility to work piece.
Great for sanding, engraving and carving. Do not use
dust blower to stop or slow down the tool. Do not
contact dust blower with fingers or workpiece during
use.
Dremel Chuck
This chuck allows you to quickly and easily change
accessories on Dremel Rotary Tools without changing
collets. Accepts accessories with 1/32" - 1/8" shank.
Read instruction manual. Insert and securely tighten
the shank of the accessory well within the jaws of the
chuck.
23