AKO PROPlus 15640 Guide Rapide page 25

FAN control
Fans stop temperature (controlled by probe 2)
(Probe 2 should be active)
Fans differential s2
Stops when compressor OFF?
Fans state during defrost
Connected Disconnected
Fans delay after defrost
Stop when opening door?
(It requires a digital input configured as door contact)
ALARM control
Alarm configuration:
Maximum alarm in sensor 1 (limits according to the alarm configuration)
Minimum alarm in sensor 1 (limits according to the alarm configuration)
Alarm differential
Temperature alarm delay
Start-up alarm delay
Alarm delay after defrost
On-Off door alarm delay
Off-On door alarm delay
Alarm relay after key (After pressing the ESC key, alarm silenced):
Connected Disconnected
DIGITAL INPUT control
Input 1 configuration :
Disabled
Severe external alarm
AUX activation
Input 1 alarm delay
Input 1 polarity:
Normally open – The input is activated on closing the contact
Normally closed – The input is activated on opening the contact
Input 2 configuration :
Disabled
Severe external alarm
AUX activation
Description
Description
Relative to the SP
Absolute
Description
Door contact External alarm
Remote defrost Remote energy saving
Low pressure input Thermostat control
Door contact External alarm
Remote defrost Remote energy saving
Low pressure input Thermostat control
Units Min Def Max.
(ºC/ºF) –40.0 4.0 99.9
(ºC/ºF) 0.1 1.0 20.0
No
Dis.
(min.) 0 3 255
No
Units Min Def Max.
Rel.
320
(ºC/ºF) A. Min. 50.0
(ºC/ºF) –40.0 50.0 A. Max.
(ºC/ºF)
0.1 1.0 20.0
0 30 255
(min.)
0 0 255
(min.)
0 0 255
(min.)
0 0 255
(min.)
0 0 255
(min.)
Con.
Units Min Def Max.
Dis.
(min.) 0 0 255
NC
Dis.