Uline H-5947 Manuel D'instructions page 3

6. Insert a cap into both ends of the hinge.
(See Figure 6)
Figure 6
Hinge
Cap
7. Insert a cotter key into the small hole in the hinge.
(See Figure 7)
Figure 7
8. Slide an adjustment plate over the end of the hinge
and up to the cotter key. (See Figure 8)
Figure 8
Cotter Key
PAGE 3 OF 18
ASSEMBLY CONTINUED
Hinge
Hinge
Cotter Key
Hinge
Adjustment
Plate
9. Insert an adjustment fork into the two larger holes in
the hinge. (See Figure 9)
Figure 9
Cap
10. Slide another adjustment plate over the end of
the hinge and adjustment fork. (See Figures 10-11)
Figure 10
Figure 11
Adjustment
Plate
Hinge
Adjustment
Fork
0721 IH-5947