Fhoton™ Drive Specifications - Franklin Electric Fhoton Drive Guide D'installation

Fhoton™ Drive Specifications
Absolute maximum input voltages
PV, DC
NOTE: Suitable for use on a photovoltaic circuit capable of delivering not more than 50 DC amps short circuit current.
Controller Model No.
Output
Output voltage, nominal
Max Amps (RMS)
Output Frequency
Efficiency at Max Power
Absolute Maximum Input Voltage
PV DC
PV source
Input Voltage, at mpp
Max Amps Input
Power at mpp
Controller Size L x W x D
Millimeters
Inches
Operating Conditions
Temperature Range
Relative Humidity Range
Enclosure Type
* 45 and 115 Vdc for the 0.55kW and 1.1 kW models respectively should not be interpreted as an adequate rated PV array output voltage for any installation. See the PV
Solar Array Specifications and System Sizing program for indication of adequate array voltage to provide useful pumping capability.
581013000864-SP075HP
300 V, open circuit
0.55 kW model*
581013000864-SP075HP
100 V AC, 3-phase
8.6 A, each phase
300 V, open circuit
45 – 240 V DC
6.8 A DC, continuous
Up to 1200 watts
Table 7: Fhoton™ Drive Specifications
581014200864-SP150HP
420V, open circuit
1.1 kW model*
581014200864-SP150HP
200 V AC, 3-phase
6.8 A, each phase
30-60 Hz
98%
420 V, open circuit
115 – 330 V DC
5.8 A DC, continuous
Up to 2000 watts
159.5 x 159.5 x 102.1 mm
6.28" X 6.28" X 4.02"
-25 °C to 50 °C
-13 °F to 122 °F
0 to 100% Condensing
NEMA 4
23