Cd Mode - SOUNDMASTER ICD2080 Manuel D'instructions

Improper operation can result in material damages!
Do not insert any recording media that deviate from the standard CD format (eg: mini-discs) into
the CD player. These may not be played and ejected correctly. Insert only one disc at a time
into the CD player.
button on the unit or press or the function on the remote control till "CD" is
1. Press
displayed, then press "OK" on the knob or press the "CD" button on remote control to
choose CD.
2. Slowly push a CD into the device with the labeled side up until the device pulls in by itself.
The display will say "Loading" and the disc functions will not work while the disc is loading.
The Playback will begin automatically once the table of contents is read. The display will
show "No Disc" when the unit is set to CD mode and there is no CD inside.
To eject the CD, press the "
➢ To pause/resume playback of the CD, press the "
➢ To switch to the next track, press the "
➢ To fast forward through a track, press and hold the "
➢ To switch to the previous track, press the "
➢ To fast backward through a track, press and hold "
➢ To stop CD playback, press the "
CD Program
1. Set the unit in Stop mode
2. Press the "PROGRAM" button on the remote Control. The display will show "T01 P01" and
"T01" flash.
3. Choose with "
programmed and confirm the track by pressing the "PROGRAM" button on the remote
control. The display changes to "P02".
4. To choose more tracks do step 3 again.
5. If all tracks are programmed press the "
programmed playback.
Shuffle mode
Press the "RANDOM" button on the remote control. The display will show the Shuffle indicator.
Repeat one track
During playback press the "REPEAT" button on the remote control once to repeat playback of
the song you are listening to.
Repeat all tracks
During playback press the "REPEAT" button on the remote control twice to repeat all songs
from the CD. To cancel the repeat mode press the "REPEAT" button on the remote control until
all symbols in the display disappear.
Audiobook function (Resume)
If you change the mode or turn off the unit and come back to the CD mode, the unit starts the
playback from the last point.
Press the " " button and start the playback again, the unit starts with the first track (track 1).
" button on the device.
" or " " or 0 to 9 on the remote control, the track which should be

CD MODE

" button
" button once
" button twice
" button on the remote control.
" button on the unit or remote control to start the
14
ICD2080 / English Instruction Manual
" button.
" button.