Time/Date; Brightness; Language - SOUNDMASTER ICD2080 Manuel D'instructions

region, DHCP, SSID, IP address, Subnet mask, Gateway address, Primary DNS and
Secondary DNS.
•
WLAN region
Select the WLAN region to obtain the optimal WLAN connectivity: Europe or Australia.
•
Manual settings
Choose wireless network connection and enable or disable DHCP (Dynamic Host
Configuration Protocol).
•
Network profile
ICD2080 remembers the last four wireless networks it has connected to, and automatically
tries to connect to whichever one of them it can find. From here you can see the list of
registered networks. You can delete unwanted networks by turning and pressing then
choosing YES to confirm delete.
•
Network connect type
Choose Wired network connection or wireless network
connection.
•
Keep network connected
If you choose to keep network connected, the WiFi will not
disconnect even you are in standby mode. Otherwise, the
connection will only available in internet radio and music player
modes. This option allows ICD2080 to be ready for DLNA
streaming in any operating modes.
When Keep network connected is selected the standby power
consumption is raised.
Set the time manually or automatically update, time format, time zone and daylight.
You may change the backlight of each environment (Normal or standby) to High, Medium High,
Medium, Medium Low, Low or Off
Change it as your preference.

TIME/DATE

BRIGHTNESS

LANGUAGE

8
ICD2080 / English Instruction Manual