Before Using - Kayoba Bike trailer Mode D'emploi

2. Put the pin (22) with retaining clip
through the hole in the tow bar and
fastener.
3. Secure with the retaining clip.
FIG. 13
Connection of safety strap
1. Put the safety strap (21) round the seat
stays.
2. Hook the safety strap's snap hook (20)
into the D-ring (19) on the tow bar (18).
3. Check that the bike trailer is safety
connected to the back axle on the bike.
4. Follow the instructions in the reverse order
to disconnect the bike trailer.
FIG. 14
PRAM WHEEL
1. Push in the tow bar (18) before fitting the
pram wheel (16).
2. Put the pram wheel in the fastener (23).
FIG. 15
3. Tighten the screw with the finger grip (15)
by turning it clockwise.
4. Check that the pram wheel is firmly
mounted in the fastener and that the
screw with the finger grip is tightened by
hand.
5. Follow the instructions in the reverse order
to remove the pram wheel.
6. Remove the pram wheel before
connecting the product to a bike.
FIG. 16
USE
BEFORE USING FOR THE FIRST TIME
Before connecting, check that the bike
1.
trailer suits the bike.
2. See bike manufacturer's instructions.
3. Check that the bike is in good condition
and that the brakes are working properly.
4. Practice with a maximum weight in a non
trafficked to get to know how the riding
characteristics of the bike have changed.

BEFORE USING

• Do not use the bike trailer if any parts of
the bike trailer and/or bike are missing,
damaged or deformed.
• Allow qualified personnel to check and if
necessary repair the bike trailer before
using it.
• Always check the condition of the bike
trailer before using it.
• Check the following points:
1. The tow bar fastener (13) is firmly fitted.
2. The safety strap (21) is connected.
3. The safety harness (29) is in good
condition and working properly.
4. The brakes on the bike are working
properly.
5. The baggage is secured.
6. The tyres have the correct pressure
(indicated on the side of the tyre).
7. All screw unions are properly tightened.
8. The cyclist and children have bike helmets.
USE
Check the following points before use:
1. The back wheel on the bike is suitable for
towing.
2. The tow bar fastener is not exposed to
external strain.
3. All the locks and catches have engaged.
WARNING!
• Risk of serious personal injury.
• Failure to follow all the instructions and
safety instructions can lead to the risk of
EN
41