How Do You Program For Immediate Cooking; Operating Principle - Atag SX3211C Mode D'emploi

how do you program for immediate cooking?

operating principle

GB 10
The water contained in the tank arrives in the cavity via a pipe. This
water is transformed into steam when it comes into contact with a hot
surface located in the lower part of the cavity:
this is the steam generator.
There is no need to add water to the cooking dish. To guarantee REAL
STEAM COOKING, your oven is furnished with specially designed
cookware that will allow for perfect cooking.
You ABSOLUTELY MUST fill the water tank to the Max. level
before cooking. Return the tank to its housing by firmly pushing
ALL THE WAY until you feel the tank LOCK INTO POSITION.
When in use, the appliance becomes hot. Hot steam will escape
when you open the door of the appliance. Keep children away.
A cooking time is pre-programmed for the various settings.
Cooking Pre-
temperature programmed
°C time
100 25 min
85 15 min
75 15 min
90 20 min
95 30 min
80 15 min
55 30 min
60 30 min
Min. Max.
setting time setting time
5 min 1 hour
5 min 1 hour
5 min 1 hour
5 min 1 hour
5 min 1 hour
5 min 1 hour
5 min 1 hour
5 min 1 hour