Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
V4.0
2.
Skip to the beginning of the next set by holding the HOLD button for about
3 seconds. Continue to hold to skip to each following set (Fig. 4). Once on
the set you wish to review, press the HOLD button briefly to move through
each data item.
CARE & MAINTENANCE
1.
Maintain the tool with care. A tool in good condition is efficient, easier to
control and will have fewer problems.
2.
Inspect the tool components periodically. Repair or replace damaged or
worn components. Only use identical replacement parts when servicing.
3.
Maintain the tool's labels and name plates. These carry important information.
If unreadable or missing, contact Princess Auto Ltd. for replacements.
WARNING! Only qualified service personnel should repair the tool. An
improperly repaired tool may present a hazard to the user and/or others.
CLEANING
NOTICE! Do not clean the lens or housing with solvents, as the solvent may
damage the tachometer's material.
1.
Clean the housing with a slightly damp cloth and mild detergent. Do not
allow water to enter the tool.
2.
Clean the lens with clean compressed air. Gently brush the remaining
debris away with a soft brush, then wipe with a moistened lens cloth or
cotton swab.
Visit www.princessauto.com for more information
Digital Laser Tachometer
8714933
Fig. 4
9
Publicité
Table des Matières
