Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

8714933

PERSONAL SAFETY

WARNING! Wear personal protective equipment approved by the Canadian
Standards Association (CSA) or American National Standards Institute (ANSI).
PERSONAL PROTECTIVE EQUIPMENT
1.
Always wear impact safety goggles that provide front and side protection
for the eyes. Eye protection equipment should comply with CSA Z94.3-07
or ANSI Z87.1 standards based on the type of work performed.
2.
Wear protective clothing designed for the work environment and tool.
3.
Non-skid footwear is recommended to maintain footing and balance in the
work environment.
PERSONAL PRECAUTIONS
Control the tool, personal movement and the work environment to avoid
personal injury or damage to tool.
1.
Do not operate any tool when tired or under the influence of drugs, alcohol
or medications.
2.
Avoid wearing clothes or jewelry that can become entangled with the
moving parts of a tool. Keep long hair covered or bound.
3.
Do not overreach when operating a tool. Proper footing and balance
enables better control in unexpected situations.
SPECIFIC SAFETY PRECAUTIONS
WARNING! DO NOT let comfort or familiarity with product (gained from
repeated use) replace strict adherence to the tool safety rules. If you use
this tool unsafely or incorrectly, you can suffer serious personal injury.
1.
Use the correct tool for the job. This tool was designed for a specific function.
Do not modify or alter this tool or use it for an unintended purpose.
LASER EMITTER
WARNING! Laser light is emitted from this tool. Follow all instructions and
procedures in this manual when using or adjusting the laser. Failure to
follow instructions may result in exposure to hazardous radiation.
WARNING! Do not stare into the laser light. The laser light may damage the
eye and cause vision injuries including partial or complete blindness.
4
Digital Laser Tachometer
For technical questions call 1-800-665-8685
V4.0

Publicité

Table des Matières
loading

Table des Matières