V4.0
1.
This tool contains a Class 2 laser product that emits laser light.
a.
A Class II or IIa laser product does not produce damaging laser light
under normal operating conditions. Viewing the laser light with a
magnifying device can cause eye damage. Viewing the laser light over
a prolonged period of time may damage the eyes.
2.
Never point the laser at yourself, another person or an animal. Avoid
shining the laser light into the eyes as it may cause an injury.
3.
Do not stare into the laser light or aperture, even with protective eyewear.
Eye damage may result from exposure to the laser light.
4.
Be aware of laser light reflected from work surfaces. Cover or remove
objects with a reflective surface when possible. Also remove any jewelry or
watches from the lower arms and hands to avoid unintended reflections.
a.
Reflected laser light from a mirror-like surface can cause the same
level of damage as looking into a laser.
b.
Diffuse reflection is not as powerful, but can cause cumulative
damage with prolonged or multiple exposures.
5.
Do not try to service or disassemble the laser device. Doing so may expose
the user to a radiation hazard. Have a qualified technician service the
device.
6.
Use the laser only when performing the intended task. Turn the laser off
once the task is complete.
7.
Always wear safety eyewear designed to block the laser wavelength and
reduce the laser light exposure to a safe level when operating or adjusting
the laser.
8.
Set the room's light levels as bright as possible to keep the eye's pupil
small. The pupil will grow larger in dim light and it is easier for direct or
reflected laser light to damage the retina.
UNPACKING
WARNING! Do not operate the tool if any part is missing. Replace the
missing part before operating. Failure to do so could result in a malfunction
and personal injury.
Visit www.princessauto.com for more information
Digital Laser Tachometer
8714933
5