Kinderkraft LEODY Guide D'utilisation page 34

Wheel lock: The baby cot has a wheel lock. To lock the wheels press the brake lever. To unlock
lift the brake lever (FIG. 22).
Base adjustment: The baby cot has base height adjustment. To lower the base unclip the zip
fastener buckle and open the zip fastener inside the baby cot along with the base placed inside
the baby cot (FIG. 23A and 23B). In the next step detach the straps from the floor and place the
folding base in the baby cot (FIG. 24A and 24B). NOTE: To ensure security, attach the straps
located under the base (FIG. 25). When the base is at the lowest level, you can use the side
entrance (FIG. 26).
4. Toy bar function*:
The toy bar is powered by battery: 3 pcs. X AA (LR6)
Battery installation/replacement: To install or replace batteries, using a screwdriver, unscrew
the cover of the battery compartment. Replace the batteries paying attention to the polarity
and close the compartment using the cover.
The toy bar has several buttons with the following functions:
The button turns the light on. Click the button again to turn the light off.
The button starts the carousel. Click the button again to turn the carousel off.
Pressing the button will start a series of soothing melodies, with three levels of
volume. When the fourth button is pressed, the melody is turned off.
The button activates the vibration function with three levels of intensity. After
pressing the button the fourth time, the function is turned off.
Maintenance and cleaning
Travel cot and folding pad fabric - wipe clean with a mild soap and water. Never clean with
abrasive, ammonia based, bleach based or spirit type cleaners. The travel cot must be dried
thoroughly before use or storage.
Changing pad * - wipe clean with a mild soap and water. Never clean with abrasive, ammonia
based, bleach based or spirit type cleaners. Allow to air dry.
Toy bar * - wipe clean with a damp cloth and mild soap. Don't immerse in water.
Toys * - hand wash at max 40°C, do not bleach, do not dry in a tumble dryer, do not iron, do not
dry clean
Frame – clean the metal frame with a soft, clean and damp cloth using mild soap.
1.5 V (not included).
34