Belangrijke Informatie - Velleman DVM97CM Mode D'emploi

- use a soft cloth moistened with a mild detergent for cleaning purposes. Do not apply solvents or abrasives to the
device.
- All repair and maintenance activities should be carried out by qualified personnel.
- Handle your thermocouple with care : do not bend the wire at sharp angles, do not overheat the thermocouple
and avoid chemical reactions that may damage the thermocouple.
6. Battery Replacement
Disconnect the output plugs and switch off the module. Disconnect the thermocouple from the thermocouple module.
Remove the screw on the bottom of the housing and open the housing. Carefully remove the old 9V-battery, insert a
new one and close the housing.
Observe all applicable laws when disposing of your old batteries !
7. Accessories
- K-type thermocouple
- battery (installed)
- user manual
1. Symbolen

BELANGRIJKE INFORMATIE

BATTERIJ
AARDING
2. Beschrijving van het frontpaneel
1) Rode power LED : knippert wanneer het toestel is ingeschakeld.
2) Ingangsaansluiting voor het thermokoppel
3) Functieschakelaar : schuifschakelaar om °C/°F/OFF te selecteren.
4) Uitgangspinnen : uitgangsspanning
DVM97CM
DVM97CM -- THERMOKOPPELMODULE
3 VELLEMAN